diff --git a/README b/README
deleted file mode 100644
index 1d28001..0000000
--- a/README
+++ /dev/null
@@ -1,66 +0,0 @@
-TL;DR -- To download the latest .deb package:
-https://github.com/K2DLS/noaacap/wiki/noaacap
-
-ABOUT NOAACAP
-
-This software is written in python 3.4 and has been tested with aprx 2.9.x.
-If you are running a version < 2.9.0 you should first update aprx.  The current
-release may be found at http://thelifeofkenneth.com/aprx/debs/.
-
-Once you are running aprx >= 2.9, install noaacap:
-
-Install via sudo dpkg -i noaacap-0.6.deb.  Then, to satisfy the dependencies,
-run sudo apt-get -f install.
-
-CONFIGURATION
-
-Add a beacon section similar to the following to /etc/aprx.conf:
-
-<beacon>
-
-beaconmode both
-cycle-size 2m
-
-beacon via WIDE2-1 \
-   srccall N0CALL-13 \
-   timeout 20 \
-   exec /usr/local/bin/noaacap.py
-
-</beacon>
-
-The timeout was needed on my older and slower single core Raspberry Pi Model B.
-The aprx default timeout is 10 seconds and the timeout may not be needed on a
-RPi 2 or newer.  If you see lots of "BEACON EXEC abnormal close" messages in
-aprx.log, then you likely need to add the timeout.
-
-The program will check for a new alert or update every 2 minutes, but only
-send if there is a change.
-
-Edit /etc/noaacap.conf:
-
-Do not remove the [noaacap] section header.
-
-myTZ should be set to the Linux TZ value for the issuing office of your
-preferred weather zone.  For a complete list of timezones, you may use
-the following command:  timedatectl list-timezones | grep America.
-
-myZone should be set to your county code.  A list of county codes may be found
-at https://alerts.weather.gov/.  Only list one county.  The program will then
-send the alert for all affected zones.  You could instead use a zone code if
-you want to be more specific.
-
-myResend should be set to 0 for no message resends or to an interval of your
-choosing.  If noaacap beacons every 2 minutes, a value of 30 would provide
-hourly resends.
-
-Logging values are 0 (quiet), 1 (informational), and 2 (debug).  Logs are 
-written to the systemd journal.
-
-USE
-
-It would be good to hear from users of this software.  Please email
-k2dls@k2dls.net with the callsign-SSID of your APRS station that is sending
-weather alerts via this program.
-
-Dan Srebnick, K2DLS
-09/28/2017
diff --git a/README b/README
new file mode 120000
index 0000000..b4986c5
--- /dev/null
+++ b/README
@@ -0,0 +1 @@
+noaacap/usr/local/share/noaacap/README
\ No newline at end of file